QYJ-K Series Automatic Hydraulic Fine Blanking Press
◊Frame-type structure with high strength and stiffness.
◊With octahedral guide rail, the main slider remains high precise motion under eccentric loads.
◊After hardening surface treatment, the seal sliding parts possess ultra-high wear resistance.
◊Two separated central pillars located at top and bottom are designed to reduce the load on
the light-weighted molds.
◊With mechanical and electrical detections,this double positioning system guarantees the high
accuracy of repeatability.
◊The automatic detection and feedback mechanism for mold plastic and foreign object effectively
protects molds from being damaged.
◊The hydraulic power packs are adopted with servo technology, which precisely controls the
blanking forces and the associated stroke rates with limited vibration and noise.
◊The finished workpieces are ejected automatically using air pressure.
◊Using non-contact programming control system, the electrical elements are space saving
,easy to operate and maintain, and have longer performance life.
◊It is optional to add coil straightening machine with auto-feed or self-lubricating system.
◊The automatic workpiece delivery, collection, segregation and inspection system could
form the automatic fine blanking production line.
.jpg)
QYJ-K320
Standard setup
¤Auto-feed machine.
Controlled by servo system, the auto-feed machine adjusts all the parameters based on
the workpieces’ material and thickness.
¤Self-oiling mechanism.
The upper and lower surfaces of the raw material are evenly covered by lubricant through
spinning roller so that the finishing quality could be guaranteed and mold’s performance
life could be extended.
¤Waste shearing machine.
Based on operation requirements, the shearing rate could be adjusted to easily collect waste.
¤Mold support.
The foldable mold support guarantees the operator’s safety and is easy for mold’s assembly
and disassembly.
Optonal setup:
●Coil Straightening Machine
Different specifications are available.
●Hydraulic Mold Fastening Device
To improve retooling efficiency.
●Oil Mist Separator
To clean the working environment by absorbing dust and oil mist.
●Photoelectric Sensor
To protect the operator under misuse failure.
●Conveyor Belt
To deliver the finished product to the specified location.
.jpg){kind=spacer}
Fine blanking mold
